BEMW Logo earth

The Bharat Engineering Metal Works

Manufacturer - Exporter - Importer - Dealer of Sheet Metal Machinery and Industrial Machines

BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery BEMW Machninery

 

PICKLING AND GALVANIZING PLANT

Washing and Brushing ACID PICKLING PLANT LINES
Acid pickling lines removes the scale and oxides from the sheets and strip metal by use of acid. The types of acid depends on the material being processed, which are Continuous, Semi-Continuous and Push-Pull type lines.

For High production of Strip ranging in thickness from 1.23 mm (0.48 in.) to a maximum of 6.41 mm ( 0.250 in.), Continuous lines are used. In these lines Strip accumulators allow coils to be loaded and unloaded while the strip continues to run through the pickling section.

When processing Strip with thicknesses between 1.53 mm (0.060 in) and 16.0 mm (0.625 in),Semi-Continuous and Push-Pull lines are used.

HOT DIP GALVANIZING PLANT LINES
Hot-Dip Galvanizing Lines to deposit a wide range of surface coating onto Steel strip and sheet is to be rolled or pressed formed, Steel wires, Tubes,Octagonal and High mast poles, etc.

Hot-Dip is horizontal or vertical non-oxidizing type furnaces. The furnaces can be sized purely toprovide a clean surface for optimum adhesion of Zinc coating.

Galvanizing Furnaces can be supplied for continuous or Batch Galvanizing of Coils, Sheets,Steel wires, Tubes, Octagonal and High mast poles, etc.

These Furnaces are Electric, Gas and Oil Fired with temperature control and mechanized.

Washing and hot dip galvanizing The system have handling of Materials, Controls, Annealing Units and also Cleaning range.

Furnaces are with High - Temperature Circulators, Molten Metal Pumps etc.

HOT DIP GALVANIZING PLANT FOR GALVANISING POLES AND HIGH MAST
MAXIMUM PLANT DIMENSIONS
LENGTH : 12,500 MM
WIDTH : 1,500 MM
DEPTH : 1,250 MM

WE SUPPLY COMPLETE HOT DIP GALVANISING PLANT LINES AND PICKLING PLANT LINES AS REQUIRED SIZES, DIMENSIONS, SPECIFICATIONS AND DRAWINGS.